Initial Configuration - Cisco ONS 15305 Quick Installation Manual

12

Initial Configuration

Use the procedures in this section to do the most important configurations of ONS 15305. The most
important tasks involved in initial configuration of ONS 15305 are:
• Configure Community-handler
• Assign an IP Address
• Change Passwords
• Erase a Community String
Configure Community-handler
The following example shows how to set community for a default user. If setting community for a
specific user, the corresponding IP address must be entered instead of 0.0.0.0.
Step 1 Enter the following command at the prompt and press Enter.
ONSCLI> com
Step 2 Enter the following command at the prompt and press Enter.
ONSCLI> Community-handler\ll
Step 3 Define the following parameters as applicable.
Add: Add-Community-entry
Edit: Edit-Community-entry
Remove: Remove-Community-entry
Show: Show-Community-entry
Exit:
ONSCLI> Community-handler\
Step 4 Enter the following command at the prompt and press Enter.
ONSCLI>Community-handler\add man=0.0.0.0 com=public acc=super traps=disable
MANAGER:
COMMUNITY:
ACCESS:
TRAPS:
30
0.0.0.0
public
super
disableONSCLI>Community-handler\