Cisco ONS 15454 SDH Configuration Manual page 524

show ons alarm
show ons alarm
Use this command to display all the active alarms on the ML-Series card running the Cisco IOS CLI
session.
Syntax Description This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged exec
Usage Guidelines
This command can be used to help diagnose and isolate card problems.
Examples
router# show ons alarm
Equipment Alarms
Active: CONTBUS-IO-A CTNEQPT-PBWORK
Port Alarms
POS0
POS1
FastEthernet0
FastEthernet1
FastEthernet2
FastEthernet3
FastEthernet4
FastEthernet5
FastEthernet6
FastEthernet7
FastEthernet8
FastEthernet9
FastEthernet10
FastEthernet11
POS0
Active Alarms : None
Demoted Alarms: None
POS1 VCG State: VCG_NORMAL
VCAT Group
Active Alarms : None
Demoted Alarms: None
Member 0
Active Alarms : None
Demoted Alarms: None
Member 1
Active Alarms : None
Demoted Alarms: None
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-48
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Active: None
Appendix A Command Reference