Table of Contents
Advertisement
Analog Input Gain
The Analog Input Gain fader (see
range of -18 dB to +12 dB. Adjustments are applied in 1 dB increments. The default
setting is 0 dB. The current Gain level for each input is displayed to the right of the
corresponding Audio Format drop-down menu.
NOTE:
Gain
LPCM-2Ch Auto
Preset Management
From the Preset Management page (see figure 49), the user can save centering and
sizing information and picture adjustments as a User preset for future recall.
Click the Preset Management icon on the global navigation bar to open the Preset
Management
Figure 49.
There are 128 global Input presets available to configure on this page or via SIS
commands (see the
In addition, up to three user presets per input can be saved or recalled. A user preset
can be saved on one input resolution (for example saved on 480p) and later recalled onto
another resolution (for example, recalled onto 1080p).
Select Save Preset , Recall Preset , or Clear to select the applicable input preset or
user preset.
figure
Analog input gain adjustment applies only to analog signals. The Input
fader is available for analog gain only when the audio format is set to Analog ,
, or Multi-Ch Auto .
page (see
figure
36,
, on page 48).
6
Preset Management Page
SIS Communication and Controls
DSC 301 HD • Product Configuration Software
48,
on the previous page) has a gain
2
section, starting on page 22).
60
Advertisement
Table of Contents
