Extron electronics DSC 301 HD User Manual page 18

A summary and comparison of the user and input presets stored values is shown below.
User Presets
Color H Image Size
Tint V Image Size
Contrast H Image Position
Brightness V Image Position
Detail Preset Name
Figure 5. User and Input Preset Values
Picture Controls submenu
This submenu allows the user to adjust all of the picture settings (see figure 6).
1
2
3
4
5
Figure 6. OSD Menu — Picture Controls Submenu
— Select this (see figure 6,
Image Position
position of the image (range depends on the current output rate).
— Select this (
Image Size
range is limited by the output resolution (maximum size is 2x the output resolution).
Brightness and Contrast
contrast (range is 0 to 127, default is 64).
— Select this (
Color and Tint
default is 64).
NOTE: Color and Tint only apply to NTSC inputs.
— Select this ( ) to adjust the detail (range is 0 to 127, default is 64).
Detail
5
Input Presets
Input Type Color
Preset Name Tint
Audio Gain/Attenuation Contrast
Film Mode Brightness
Detail
)to adjust the horizontal and vertical
1
) to adjust the horizontal and vertical size of the image. The
2
— Select this ( ) to independently adjust brightness and
3
) to adjust the color and tint (range is 0 to 127,
4
H Start H Image Size
V Start V Image Size
H Active H Image Position
V Active V Image Position
Phase Total Pixels
DSC 301 HD • Operation 12