Extron electronics DSC 301 HD User Manual page 38

Command ASCII Command
(host to scaler)
Input presets
Recall preset 2*X2).
Save preset 2*X2),
Delete/clear preset
EX2*X2)PRST}
Input preset name
Write name
E2*X2),X1#PNAM}
Read name
E2*X2)PNAM}
NOTE:
Unassigned presets = "
only for previously saved presets.
User Presets
Color H/V Image
Position
Tint H/V Image
Size
Contrast Preset Name
Brightness
Detail
Figure 18. Values Saved in User and Input Presets
Auto memories (per input)
Enable
EX!*1AMEM}
Disable
EX!*0AMEM}
View setting
EX!AMEM}
NOTE:
1 = composite, 2 = RGB.YUV, and 3 = HDMI
X! = Input selection:
X( = Enable or disable:
X1# = Text label or preset name, up to 16 characters
1-128
X2) = Input presets,
[unassigned]". To restore a default user preset name, enter a single space character for
Color H/V Image
Position
Tint H/V Image
Size
Contrast Preset Name
Brightness
Detail
0 1
= Off or disable, = On or enable (default)
(global)
Response
(scaler to host)
2RprX2)]
2SprX2)]
PrstX2*X2)]
Pnam2*X2),X1#]
X1#]
Input Presets
Input Type H Start
Audio Gain/ V Start
Attenuation
Film Mode H Active
Total Pixels V Active
Phase
AmemX!*1]
AmemX!*0]
X(]
DSC 301 HD • SIS Communication and Control
Additional Description
X2)
Recall input preset for selected
input.
X2)
Save input preset for selected
input.
X2)
Clears input preset , and
X2)
sets input preset name to
[unassigned].
X2) X1#
Set the input preset to .
X2)
Read the name for input preset
X1#
. Valid
Set auto memory on. Previous
settings for incoming signal are auto
recalled.
Set auto memory off. Manual recall
of input presets needed to configure
input.
View current auto memory for input
X!
.
.
32