Show Ip Interface - Avaya C460 Reference Manual

show ip interface

User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
interface-name
ip-address
vlan
Example:
Router-1> show ip interface
Showing 2 Interfaces
mgmt is administratively up
On vlan Default
Internet address is 10.49.54.14
255.255.255.0
Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
baba is administratively down
On vlan v2
Internet address is 192.168.0.14
255.255.0.0
Broadcast address is 192.168.255.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Avaya C460 Reference Guide
Chapter 2
The name of the interface whose information you
want to display.
The IP address of the interface whose information
you want to display.
The name or ID of the VLAN over which there are
interfaces you want to display.
Avaya C460 CLI Commands
, subnet mask is
, subnet mask is
159