Table of Contents
Advertisement
Example:
C460-1> show ip access-lists
ip access-list 100 10 deny-and-notify tcp
192.168.55.0
any range
ip access-list 100 30 deny udp
any
any
optional
ip access-list 100 35 deny ip
any
any
ip access-list 100 55 fwd7 tcp
host 192.168.3.4
host 10.6.7.8
default action for list 100 is permit
show ip access-list-summary
User level: user, privileged, supervisor
Use the show ip access-list-summary command to display a summary of
policy lists.
The syntax for this command is:
show ip access-list-summary
Example:
C460-1> show ip access-list-summary
The policy lists summary:
default List (0)
show ip arp
User level: read-only, read-write, admin.
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
if-name
Avaya C460 Reference Guide
0.0.0.255
7000
8000
eq
Interface name (string up to 32 chars)
Chapter 2
Avaya C460 CLI Commands
range
5000
33333
6000
157
Advertisement
Table of Contents
