show erase status
User level: user, privileged, supervisor
Use the show erase status command to view the status of the erase
configuration operation.
The syntax for this command is:
show erase status
show event-log
User level: read-only, read-write, admin.
Displays the encrypted event log file.
The syntax for this command is:
show event-log
show event-log (Layer 3)
User level: read-only, read-write, admin.
Displays the encrypted event log file.
The syntax for this command is:
show event log
show fragment
User level: read-only, read-write, admin.
Use the show fragment command to display information regarding fragmented
IP packets that are destined to the router.
The router does not perform reassambly of packets in transit.
This command displays the following information:
Size
Chain
Timeout
Queue
Assemble
Fail
Avaya C460 Reference Guide
Maximum number of packets set by the fragment size
command
Maximum number of fragments for a single packet set by the
fragment chain command.
Maximum number of seconds set by the fragment timeout
command.
Number of packets currently awaiting reassembly.
Number of packets successfully reassembled
Number of packets which failed to be reassembled
Chapter 2
Avaya C460 CLI Commands
153