Show Ip Icmp; Show Ip Interface - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Example:
show ip arp
show ip arp marketing
show ip arp 192.168.49.1
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show ip arp marketing_vlan
show ip arp static
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

show ip icmp

User level: read-only, read-write, admin.
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
Router-1> show ip icmp
ICMP error messages status is ENABLE

show ip interface

User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
interface-name
ip-address
vlan
132
Display interface ARP mapping
The name of the interface whose information you
want to display.
The IP address of the interface whose information
you want to display.
The name or ID of the VLAN over which there are
interfaces you want to display.
Display all ARP mapping
Display one host ARP mapping
Display vlan ARP mapping
Display static ARP mapping
Avaya P460 Reference Guide