Ip Rip Authentication Mode - Avaya C460 Reference Manual

Type interface [name] at the command prompt to enter interface mode if
necessary.
Use the ip rip authentication key command to set the authentication
string used on the interface.
Use the no ip rip authentication key command to clear the password.
The syntax for this command is:
[no] ip rip authentication key <password>
password
Example:
To set the authentication string used on the interface "marketing" to be "hush-
hush".
Router-1(configure-if:marketing) # ip rip authentication
key hush-hush

ip rip authentication mode

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if
necessary.
Use the ip rip authentication command to specify the type of authentication
used in RIP Version 2 packets.
Use the no ip rip authentication command to restore the default value of
none.
The syntax for this command is: [no] ip rip authentication mode
[simple|none]
simple|none
Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface
Avaya C460 Reference Guide
The authentication string for the interface. Up to 16 characters are
allowed.
The authentication type used in RIP Version 2 packets:
• simple - clear text authentication.
• none - no authentication.
Chapter 2 Avaya C460 CLI Commands
55