Show Ip Interface Command - Avaya P334T-ML User Manual

Chapter 7 CLI – Layer 3
Example:
Router-1 (super)#
Showing 1 rows
Address
--------------- ----------------- ----------- ------- --------
149.49.70.68

show ip interface Command

Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
interface-name
ip-address
vlan
Output Example:
Showing 2 Interfaces
mgmt is administratively up
On vlan Default
Internet address is 10.49.54.14
Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
baba is administratively down
On vlan v2
Internet address is 192.168.0.14
Broadcast address is 192.168.255.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
162
sh ip reverse-arp 00:10:a4:98:97:e0
MAC Address
00:10:a4:98:97:e0
The name of the interface whose information you
want to display.
The IP address of the interface whose information
you want to display.
The name or ID of the VLAN over which there are
interfaces you want to display.
I/F Type
e-70 Dynamic
, subnet mask is 255.255.255.0
, subnet mask is 255.255.0.0
P334T-ML User's Guide
TTL
14355