Ip Access-List-Dscp Precedence - Avaya C460 Reference Manual

<action>
policy-
list-
number
dscp
action
Example:
C460-1(configure)# ip access-list-dscp operation 101 0-63
permit
C460-1(configure)# ip access-list-dscp operation 101 62
fwd5

ip access-list-dscp precedence

User level: read-write, admin.
If you are at the "read-write" user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Use the ip access-list-dscp precedence command to ?
The syntax for this command is:
ip access-list-dscp precedence <policy-list-number> <dscp>
<precendence>
policy-list-
number
dscp
precedence
Avaya C460 Reference Guide
A valid id number for a policy list currently defined for the module
(100 - 149)
Range of dscp. For example:
• 0 to 63
• <low-dscp>-<high-dscp> <low-dscp>-<low-dscp>: apply the
map to all packets with DSCP from <low-dscp> to <high-dscp>.
• permit: do nothing, let the packet pass:
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1fwd7: Set the frame COS field to 0,7
A valid id number for a policy list currently defined for the
module (100 to 149)
DSCP entry (0 to 63)
????
mandatory
optional
Chapter 2 Avaya C460 CLI Commands
41