Table of Contents
Advertisement
The syntax for this command is:
[no] arp timeout <seconds>
seconds
Example:
To set the arp timeout to one hour:
C460-1(configure)# arp timeout 3600
To restore the default arp timeout:
C460-1(configure)# no arp timeout
banner login
Use the banner login command to enter the login banner configuration mode.
Use the no banner login command to set the login banner to the default value.
Delete the current banner using the no banner login command before
creating a new banner, .
The syntax for this command is:
[no] banner login
Example:
C460-1(super)# banner login
C460-1(super)#
banner login line
See "line"
banner post-login
Use the banner post-login command to enter the post-login configuration
mode.
Use the no banner post-login command to set the post-login banner to the
default value.
Before creating a new banner, delete the current banner using the no banner
post-login command.
Avaya C460 Reference Guide
Chapter 2
The amount of time, in seconds, that an entry remains
in the arp cache.
Avaya C460 CLI Commands
15
Advertisement
Table of Contents
