Restricted Ground Fault; Transducer Inputs And Outputs; Distance - GE T60 Instruction Manual

6.3 METERING
PATH: ACTUAL VALUES
 RESTRICTED
 GROUND FAULT 1
The differential and restraint current values for the restricted ground fault element are displayed in this menu.
PATH: ACTUAL VALUES
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
PATH: ACTUAL VALUES
6
 DISTANCE

6-26
 
METERING RESTRICTED GROUND FAULT CURRENTS
RGF 1 DIFF
0.000
RGF 1 RESTR Igr:
MESSAGE
0.000
 
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
 
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
 
METERING

DISTANCE

AB LOOP RESISTANCE
RAB: 0.00 Ohms
AB LOOP REACTANCE
MESSAGE
XAB: 0.00 Ohms
AB LOOP IMPEDANCE
MESSAGE
ZAB: 0.00 Ohms
AB LOOP IMPEDANCE
MESSAGE
ANGLE: 0.00 DEG
BC LOOP RESISTANCE
MESSAGE
RBC: 0.00 Ohms
BC LOOP REACTANCE
MESSAGE
XBC: 0.00 Ohms
BC LOOP IMPEDANCE
MESSAGE
ZBC: 0.00 Ohms
BC LOOP IMPEDANCE
MESSAGE
ANGLE: 0.00 DEG
CA LOOP RESISTANCE
MESSAGE
RCA: 0.00 Ohms
CA LOOP REACTANCE
MESSAGE
XCA: 0.00 Ohms
T60 Transformer Protection System

Igd:
A
A

6.3.13 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6 ACTUAL VALUES

6.3.12 RESTRICTED GROUND FAULT

RESTRICTED GROUND FAULT 1(6)
6.3.14 DISTANCE
GE Multilin