GE T60 Instruction Manual page 175

5 SETTINGS 5.2 PRODUCT SETUP
Example 3 — Incorrect
IP1/Mask1: 10.1.1.2/255.0.0.0
IP2/Mask2: 10.2.1.2/255.0.0.0
IP3/Mask3: 10.3.1.2/255.0.0.0
This example is incorrect because the mask of 255.0.0.0 used for the three IP addresses makes them belong to the same
network of 10.x.x.x.
Single LAN, No Redundancy
The topology shown in the following figure allows communications to SCADA, local configuration/monitoring through
EnerVista, and access to the public network shared on the same LAN. No redundancy is provided.
Figure 5–4: NETWORK CONFIGURATION FOR SINGLE LAN
Public Network
SCADA
EnerVista Software
5
LAN1
ML3000
P1
P2 P3
IP1/
MAC1
UR
859708A2.vsd
GE Multilin T60 Transformer Protection System 5-29