Product Information; Model Information; Firmware Revisions - GE T60 Instruction Manual

6 ACTUAL VALUES

6.5PRODUCT INFORMATION


PATH: ACTUAL VALUES PRODUCT INFO
 MODEL INFORMATION

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
— UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
ETHERNET MAC ADDRESS
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is
one higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.

PATH: ACTUAL VALUES PRODUCT INFO
 FIRMWARE REVISIONS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed.
GE Multilin


MODEL INFORMATION

ORDER CODE LINE 1:
T60-E00-HCH-F8H-H6A
SERIAL NUMBER:
ETHERNET MAC ADDRESS
000000000000
MANUFACTURING DATE:
0
PMU FEATURE ACTIVE:
No
CT/ VT ADVANCED DIAG
ACTIVE: No
OPERATING TIME:
0:00:00
LAST SETTING CHANGE:
1970/01/01 23:11:19


FIRMWARE REVISIONS

T60 TransformerRelay
REVISION: 7.2x
MODIFICATION FILE
NUMBER: 0
BOOT PROGRAM
REVISION: 3.01
FRONT PANEL PROGRAM
REVISION: 2.01
COMPILE DATE:
2012/09/15 04:55:16
BOOT DATE:
2012/09/15 16:41:32
T60 Transformer Protection System
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION
Range: standard GE order code format;
example order code shown
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: Yes, No
Range: Yes, No
Range: operating time in HH:MM:SS
Range: YYYY/MM/DD HH:MM:SS
6.5.2 FIRMWARE REVISIONS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
Range: Any valid date and time.
Date and time when product firmware was built.
Range: Any valid date and time.
Date and time when the boot program was built.
6
6-31