Volts Per Hertz; Restricted Ground Fault; Transducer Inputs And Outputs - GE G30 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 VOLTS PER HERTZ 1

The volts per hertz actual values are displayed in this menu.

PATH: ACTUAL VALUES METERING
 RESTRICTED
 GROUND FAULT 1
MESSAGE
The differential and restraint current values for the restricted ground fault element are displayed in this menu.

PATH: ACTUAL VALUES METERING
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.

PATH: ACTUAL VALUES METERING
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin


VOLTS PER HERTZ 1(2)

VOLTS PER HERTZ 1:
0.000 pu

RESTRICTED GROUND FAULT CURRENTS
RGF 1 DIFF Igd:
0.000 A
RGF 1 RESTR Igr:
0.000 A

TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA

TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
G30 Generator Protection System
6.3.12 VOLTS PER HERTZ

6.3.13 RESTRICTED GROUND FAULT


RESTRICTED GROUND FAULT 1(4)

6.3.14 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6.3 METERING
6
6-25