Pmu Aggregator 1; Volts Per Hertz - GE T60 Instruction Manual

6 ACTUAL VALUES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.

PATH: ACTUAL VALUES METERING
 PMU AGGREGATOR 1

Actual values for the IEC 61850-90-5 PDU size are provided. These values allow you to know the approximate Ethernet
frame size for the data streams from each aggregator. This can help to estimate network loading. The PDU size shown in
the displays does not include the Ethernet, UDP, or IP layers. PDU sizes approaching approximately 1500 bytes result in
fragmented data frames, causing increased network traffic.

PATH: ACTUAL VALUES METERING
 VOLTS PER HERTZ 1

The volts per hertz actual values are displayed in this menu.
GE Multilin
PMU 1 V2:
0.0000 kV, 0.00°
PMU 1 V0:
0.0000 kV, 0.00°
PMU 1 IA:
0.0000 kA, 0.00°
PMU 1 IB:
0.0000 kA, 0.00°
PMU 1 IC:
0.0000 kA, 0.00°
PMU 1 IG:
0.0000 kA, 0.00°
PMU 1 I1:
0.0000 kA, 0.00°
PMU 1 I2:
0.0000 kA, 0.00°
PMU 1 I0:
0.0000 kA, 0.00°
PMU 1 FREQUENCY:
0.0000 Hz
PMU 1 df/dt:
0.0000 Hz/s
PMU 1 CONFIG CHANGE
COUNTER: 0

PHASOR MEASUREMENT UNIT

PMU AGGREGATOR 1

PDU SIZE: 0


VOLTS PER HERTZ 1(2)

VOLTS PER HERTZ 1:
0.000 pu
T60 Transformer Protection System
Range: Substituted with zero if delta-connected VTs.
Range: 0 to 65535
6.3.10 PMU AGGREGATOR

PMU AGGREGATOR 1
6.3.11 VOLTS PER HERTZ
6.3 METERING
6
6-25