GE T60 Instruction Manual page 163

5 SETTINGS
Confirm RADIUS Confirmation of the shared secret. The
Authentication entry displays as asterisks.
(Shared) Secret
General Security Settings
SETTING NAME DESCRIPTION
Session Lockout Number of failed authentications before the
device blocks subsequent authentication
attempts for the lockout period
Session Lockout The period in minutes that a user is prevented
Period from logging in after being locked out
Syslog Server IP The IP address of the target Syslog server to
Address which all security events are transmitted
Syslog Server Port The UDP port number of the target syslog server
Number to which all security events are transmitted
Device When enabled, local device authentication with
Authentication roles is allowed. When disabled, the UR only
authenticates to the AAA server (RADIUS).
NOTE: Administrator and Supervisor (if still
enabled) remain active even after device
authentication is disabled. The only permission
for local Administrator is to re-enable device
authentication when device authentication is
disabled. To re-enable device authentication, the
Supervisor unlocks the device for setting
changes, and then the Administrator can re-
enable device authentication.
Firmware Locked Indicates if the device receives firmware
upgrades. If Yes and the firmware upgrade
attempt is made, the device denies the upgrade
and displays an error message that the lock is
set. On each firmware upgrade, this setting goes
back to the default.
Factory Service When enabled (checkbox selected), the device
Mode can go into factory service mode. To enable,
Supervisor authentication is necessary.
Restore to Defaults Sets the device to factory defaults
Supervisor role When enabled (checkbox selected), the
Supervisor role is active. To enable,
Administrator authentication is necessary. When
disabled, the Supervisor role is inactive. To
disable, Supervisor authentication is necessary.
RADIUS user Ensure that RADIUS user names are not the
names same as local/device role names
Password Local/device roles except for Observer are
password-protected. All RADIUS users are
password-protected.
GE Multilin
See the
Password
Requirement
s section
MIN
0 (lockout
disabled)
0 (no period) 9999
0.0.0.0
1
Disabled
No
Disabled
No
Disabled
See RADIUS
server
documents
See the
Password
Requirement
s section
T60 Transformer Protection System
5.2 PRODUCT SETUP
245 characters N/A
MAX DEFAULT UNITS MINIMUM
99 3 -
3 min
223.255. 0.0.0.0 -
255.254
65535 514 -
Enabled Enabled -
Yes Yes -
Enabled Disabled -
Yes No -
Enabled Enabled -
See -
RADIUS
server
documents
See the Change Text
following Me1#
password
section for
requireme
nts
- Administrator
PERMISSION
Administrator
Administrator
Administrator
Administrator
Administrator
5
Administrator
Supervisor
(Administrator
when Supervisor
is disabled)
Administrator
Administrator to
enable and
Supervisor to
disable
Administrator
The specified role
and Administrator,
except for
Supervisor, where
it is only itself
5-17