Endress+Hauser Levelflex FMP55 Operating Instructions Manual page 92

Commissioning (block-based operation)
92
Severity of the Default diagnostic category Source of the
event
1) This event can be removed from the group in order to define its behavior individually; see section
"Configurable area".
Severity of the Default diagnostic category Source of the
event
Lowest severity Maintenance required (M)
Levelflex FMP55 FOUNDATION Fieldbus
Bit Events within the group
event
Configuration 21 S441: Current output 1
Process 20 • S801: Energy too low
• S825: Operating temperature
• S921: Change of reference
• S942: In safety distance
• S943: In blocking distance
• S944: Level range
• S968: Level limited
Bit Events within the group
event
Sensor 19 not used in Levelflex
Elektronics 18 • M270: Main electronics failure
• M272: Main electronics failure
• M311: Electronics failure
Configuration 17 M438: Data set
Process 16 M803: Current loop 1
1)
Endress+Hauser