Language Selection; Configuration Of An Interface Measurement - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Levelflex FMP55 FOUNDATION Fieldbus
Endress+Hauser
XD_SCALE
EU_100
EU_0
0
 19 Scaling of the measured value in an AI Block
• If you have selected the Direct mode for the L_TYPE parameter, you cannot change
the values and units for XD_SCALE and OUT_SCALE.
• The L_TYPE, XD_SCALE and OUT_SCALE parameters can only be changed in the
OOS block mode.
12.4

Language selection

Step Block
1 DISPLAY (TRDDISP)
1) When ordering a device the set of available languages is defined. Refer to the product structure, feature
500 "Additional Operation Language".
12.5

Configuration of an interface measurement

The Setup method can also be used to configure the measurement. It is called up via
the SETUP (TRDSUP) transducer block.
Commissioning (block-based operation)
1
0
EU_0
1
Parameter
Language (language)
OUT_SCALE
EU_100
OUT_VALUE
Action
1)
Select language .
Selection:
• 32805: Arabian
• 32824: Chinese simplified
• 32842: Czech
• 32881: Dutch
• 32888: English
• 32917: French
• 32920: German
• 32945: Italian
• 32946: Japanese
• 32948: Korean
• 33026: Polish
• 33027: Portuguese
• 33062: Russian
• 33083: Spanish
• 33103: Thai
• 33120: Vietnamese
• 33155: Bahasa
• 33166: Turkish
A0017338
85