Endress+Hauser Levelflex FMP55 Operating Instructions Manual page 132

Operating menu
Full calibration
Navigation
Description
User entry
Factory setting
Additional information
Level
Navigation
Description
132
 Setup → Full calibr.
Specify the distance F between the minimum level (0%) and the maximum level (100%).
Depending on the probe
Depending on the probe
 28 Full calibration (F) for interface measurements
In the case of interface measurements the Full calibration parameter is valid for
both, the total and the interface level.
 Setup → Level
Displays measured level L
Levelflex FMP55 FOUNDATION Fieldbus
100%
F
0%
(before linearization).
L
100%
F
0%
Endress+Hauser

A0013188