Endress+Hauser Levelflex FMP55 Operating Instructions Manual page 136

Operating menu
Interface distance
Navigation
Prerequisite
Description
Additional information
Confirm distance
Navigation
Description
Selection
Factory setting
* Visibility depends on order options or device settings
136
 Setup → Interface dist.
Operating mode (→  129) = Interface or Interface with capacitance
Displays the measured distance D
threaded connection) and the interface.
The unit is defined in the Distance unit parameter (→  129).
 Setup → Confirm distance
Specify, whether the measured distance matches the real distance.
Depending on the selection the device automatically sets the range of mapping.
• Manual map
• Distance ok
• Distance unknown
*
• Distance too small
*
• Distance too big
• Tank empty
• Delete map
Distance unknown
Levelflex FMP55 FOUNDATION Fieldbus
between the reference point (lower edge of flange or
I
D
I
D
I
Endress+Hauser
A0013202
