Flex State Parameters - GE B30 Instruction Manual

5 SETTINGS
Figure 5–10: USER-PROGRAMMABLE PUSHBUTTON LOGIC (Sheet 2 of 2)

PATH: SETTINGS PRODUCT SETUP
 FLEX STATE
 PARAMETERS
MESSAGE
MESSAGE
This feature provides a mechanism where any of 256 selected FlexLogic™ operand states can be used for efficient moni-
toring. The feature allows user-customized access to the FlexLogic™ operand states in the relay. The state bits are packed
so that 16 states may be read out in a single Modbus register. The state bits can be configured so that all of the states
which are of interest to the user are available in a minimum number of Modbus registers.
GE Multilin


FLEX STATE PARAMETERS

PARAMETER 1:
Off
PARAMETER 2:
Off
↓
PARAMETER 256:
Off
B30 Bus Differential System
5.2 PRODUCT SETUP
5.2.13 FLEX STATE PARAMETERS
Range: FlexLogic™ operand
Range: FlexLogic™ operand
Range: FlexLogic™ operand
5
5-51