GE B30 Instruction Manual page 109

Bus differential system, ur series
Hide thumbs Also See for B30:
Table of Contents

Advertisement

4 HUMAN INTERFACES
Once the template has been applied, users will only be able to view and edit the FlexLogic™ entries not locked by the tem-
plate. The effect of applying the template to the FlexLogic™ entries in the above procedure is shown below.
Typical FlexLogic™ entries without template applied.
Figure 4–8: LOCKING FLEXLOGIC ENTRIES THROUGH SETTING TEMPLATES
The FlexLogic™ entries are also shown as locked in the graphical view (as shown below) and on the front panel display.
b) LOCKING FLEXLOGIC™ EQUATIONS TO A SERIAL NUMBER
A settings file and associated FlexLogic equations also can be locked to a UR serial number. Once FlexLogic entries in a
settings file have been secured, use the following procedure to lock the settings file to a serial number. A serial number is
viewable under Actual Values > Product Info > Model Information, the inside front panel, and the rear of the device.
GE Multilin
Figure 4–9: SECURED FLEXLOGIC™ IN GRAPHICAL VIEW
B30 Bus Differential System
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
Typical
FlexLogic™ entries
locked with template via
Template Mode > View In Template Mode
the
command.
842861A1.CDR
4
4-9

Advertisement

Table of Contents
loading

Table of Contents