Led Indicators - GE B30 Instruction Manual

4.3 FACEPLATE INTERFACE
The following figure shows the vertical arrangement of the faceplate panels for relays ordered with the vertical option.
4
a) ENHANCED FACEPLATE
The enhanced front panel display provides five columns of LED indicators. The first column contains 14 status and event
cause LEDs, and the next four columns contain the 48 user-programmable LEDs.
The RESET key is used to reset any latched LED indicator or target message, once the condition has been cleared (these
latched conditions can also be reset via the
intended for connection to a portable PC.
The USER keys are not used in this unit.
Figure 4–18: TYPICAL LED INDICATOR PANEL FOR ENHANCED FACEPLATE
The status indicators in the first column are described below.
• IN SERVICE: This LED indicates that control power is applied, all monitored inputs, outputs, and internal systems are
OK, and that the device has been programmed.
4-14
Figure 4–17: UR-SERIES STANDARD VERTICAL FACEPLATE PANELS
SETTINGS
B30 Bus Differential System
 
INPUT/OUTPUTS RESETTING
842811A1.CDR
4 HUMAN INTERFACES

4.3.2 LED INDICATORS

menu). The RS232 port is
GE Multilin