Ground Control; Touch Panel; Installation And Owner's Manual; Operation - Onecontrol Touch Panel - Lippert Components Ground Control TT Installation And Owner's Manual

Operation - OneControl

Touch Panel

BE SURE TO PARK THE TRAILER ON SOLID AND LEVEL
GROUND. PRIOR TO OPERATION, CLEAR ALL JACK
LANDING LOCATIONS OF DEBRIS AND OBSTRUCTIONS.
THE LOCATIONS SHOULD ALSO BE FREE OF SURFACE
DEPRESSIONS AND MOISTURE. WHEN PARKING THE
TRAILER ON EXTREMELY SOFT SURFACES, UTILIZE
LOAD DISTRIBUTION PADS UNDER EACH JACK.
PEOPLE AND PETS SHOULD BE CLEAR OF THE TRAILER
WHILE THE LEVELING SYSTEM IS OPERATED. NEVER
LIFT THE TRAILER COMPLETELY OFF THE GROUND.
LIFTING THE TRAILER SO THE WHEELS ARE NOT
TOUCHING THE GROUND WILL CREATE AN UNSTABLE
AND UNSAFE CONDITION.

Basic Jack Operation in Standard Mode

To reach Standard Mode (Fig.29) for leveling:
1. Power on the OneControl Touch Panel (Fig. 29L).
2. Press "MyRV Control Panel" on the main screen
(Fig.30A).
NOTE: On newer versions of the OneControl Touch Panel,
the screen will not open to "MyRV Control Panel." The screen
will open to "OneControl" with access to various functions,
including "Leveling." Choose "Leveling."
3. Press the "Leveler" icon (Fig.31A).
4. The screen will show the system menu (Fig.29) for
Standard Mode. The Power Tongue Jack can be extended/
retracted in Standard Mode. Front and rear jacks cannot be
operated in standard mode.
lippertcomponents.com 574-537-8900

Ground Control

Leveling OneControl
Touch Panel

Installation and Owner's Manual

(For Aftermarket Applications)
Fig.30
A
Fig.31

Basic Jack Operation in Manual Mode

To reach Manual Mode (Fig.32) for leveling:
1. While in Standard Mode (Fig.29), use the arrows
(Fig.29B) to scroll to Manual Mode (Fig.29G). Hit
"ENTER" (Fig.29H).
2. Front and rear jacks can be operated in Manual
Mode. The Power Tongue Jack cannot be operated in
Manual Mode.
B
A
C
D
Fig.32
16
Rev: 08.17 - GC
TT
®
A
E
F
TT Leveling OneControl
®
®
Touch Panel
®