Configuring Linc Remote To Sync To Onecontrol Touch Panel Or Onecontrol App - Lippert Components Ground Control TT Installation And Owner's Manual

Configuring Linc Remote to
Sync to OneControl Touch Panel
or OneControl App
1. Turn on the Linc Remote (Fig.38I) and enter a PIN.
2. Choose "Leveler" from the menu screen.
3. Turn on the OneControl Touch Panel (Fig.29L).
4. On the OneControl Touch Panel, press the
"CONNECTED" icon at the top of the screen (Fig.39A)
quickly 6 times. Wait a few seconds until the gear icon
with "OPTIONS" appears (Fig.40A).
NOTE: If configuring to the OneControl App, press the
"OPTIONS" button.
5. Press the gear icon with "options" (Fig.40A).
6. Use the "UP" and "DOWN" arrows (Fig.40B) to scroll
to "WIRELESS CONFIG" (Fig.41).
7. Press "ENTER" (Fig.41A). The screen will display
"Wireless Configuration Press any Linc button to Sync"
(Fig.42).
8. Press any button in "Leveler" mode on the Linc
Remote (Fig.38).
9. Pressing "ABORT" on the OneControl Touch Panel
(Fig.42A) will cancel configuration sequence.
Fig.39
lippertcomponents.com
A
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
Fig.40
Fig.41
Fig.42
24
Rev: 08.17 - GC
TT
®
B
A
A
TT Leveling OneControl
®
®
A
Touch Panel
®