Hitch Recognition; Linc ™ Remote Diagram - Optional - Lippert Components Ground Control TT Installation And Owner's Manual

Leveling onecontrol touch panel
Hide thumbs Also See for Ground Control TT:
Table of Contents

Advertisement

Hitch Recognition

1. Power on the OneControl Touch Panel App.
2. Press the "Leveler" icon (Fig.36A).
3. Press "AUTO HITCH" (Fig.33K).
A. Rear jacks will retract.
B. The Power Tongue Jack will extend to the ground.
C. Front leveling jacks will retract.
D. The tongue jack will then adjust the height of the front
of the trailer coupler to the point at which the "AUTO
LEVEL" button was most recently pressed.
4. Back the tow vehicle into position to align the tow vehicle
hitch and trailer coupler with each other.
5. Press "RETRACT" button, then press the "FRONT"
button to retract the tongue jack until the coupler sets into
position on top of the tow vehicle hitch.
6. Latch the tow vehicle hitch and connect any wires,
chains or sway control that may be equipped between the
tow vehicle and trailer.
7. Press the "RETRACT" button and then press and hold
the "FRONT" button until the Power Tongue Jack fully
retracts.
NOTE: To utilize the Power Tongue Jack for the hitching
process see "Operation - Power Tongue Jack."
lippertcomponents.com
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
Linc
Remote Diagram - Optional
Part Numbers: 329164 - Remote & 267401 - Charger
A
B
C
Fig.38
Callout Description
A
Retract - Retracts Power Tongue Jack.
Front Arrow - Operates Power Tongue Jack
B
(See Note below)
C
Left Arrow - (See Note below)
D
Help - Provides contact information for LCI.
Extend - Extends Power Tongue Jack.
E
(See Note below)
F
Right Arrow - (See Note below)
G
Rear Arrow - (See Note below)
H
Auto Level - Initiates Auto Level sequence.
I
Power Button - Turns Linc Remote on and off.
NOTE: When the OneControl Touch Panel is placed in
Manual Mode, the Linc Remote will operate the jacks in
a similar fashion as the OneControl, with the exception of
operating individual jacks. Jacks will only operate in pairs.
(See "Operation - OneControl Touch Panel.")
23
Rev: 08.17 - GC
TT
®
TT Leveling OneControl
®
®
D
E
F
G
H
I
Touch Panel
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents