Determining The Mounting Position And Installing Leveling Sensors - Lippert Components Ground Control TT Installation And Owner's Manual

Optional Drop Leg Foot Pad
Part Number: 405217
The Power Tongue Jack has an option to replace the foot
pad with a Drop Leg foot pad.
1. If using the Drop Leg foot pad, attach the foot pad
(Fig.13C) to the jack leg (Fig.13A).
2. Secure it with the snapper pin (Fig.13B).
Fig.13
Determining the Mounting
Position and Installing
Leveling Sensors
Installing Leveling Sensors
The leveling sensors have a limited mounting area for
proper performance. The front sensor must be within 36
from the front of the frame as signified by section A in
(Fig.14). Ensure that the front sensor is mounted in front of
the front leveling jacks. The rear sensor must be in line with
or behind the rear leveling jacks, as signified by section B
in (Fig.14). Both the front sensor and the rear sensor must
also be mounted in line with the center of the frame, as
signified by the dotted blue line in (Fig.14).
lippertcomponents.com
A
B
C
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
front of trailer
section A
front
left jack
rear
left jack
section B
"
rear of trailer
Fig.14
8
Rev: 08.17 - GC
TT
®
power
tongue jack
TT Leveling OneControl
®
®
front
right jack
rear
right jack
Touch Panel
®