Basic Jack Operation In Standard Mode; Basic Jack Operation In Manual Mode; Onecontrol Touch Panel App In; Standard And Manual Modes - Lippert Components Ground Control TT Installation And Owner's Manual

Basic Jack Operation in Standard Mode

To reach Standard Mode (Fig.33) for leveling:
1. Power on the OneControl Touch Panel App.
2. Press the "Leveler" icon (Fig.36A).
3. The screen will show the system menu (Fig.33) for
Standard Mode. The Power Tongue Jack can be extended/
retracted in Standard Mode. Front and rear jacks cannot be
operated in Standard Mode.
A
Fig.36

Basic Jack Operation in Manual Mode

To reach Manual Mode (Fig.37) for leveling:
1. While in Standard Mode (Fig.33), use the arrows (Fig.33G)
to scroll to Manual Mode (Fig.33E). Hit "ENTER" (Fig.33B).
2. Front and rear jacks can be operated in Manual Mode. The
Power Tongue Jack cannot be operated in Manual Mode.
B
A C
D
Fig.37
lippertcomponents.com
E F
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)

OneControl Touch Panel App in

Standard and Manual Modes

Standard Mode Features
A. Press "EXTEND" (Fig.33I) or "RETRACT" (Fig.33H)
and "FRONT" (Fig.33A) to extend or retract the Power
Tongue Jack.
B. Press the "AUTO LEVEL" (Fig.33J) button to start
the auto leveling sequence.
C. Press the "AUTO HITCH" (Fig.33K) button to start
the hitch recognition sequence when reconnecting to
the tow vehicle.
D. Use the "UP" or "DOWN" arrow (Fig.33G) buttons to
cycle through the menu screen options:
I. Info: Scroll to "Info" (Fig.33C) and press "enter"
(Fig.33B) button to display system information, e.g.,
angle, jack stroke or software version.
II. Auto Retract: Scroll to "Auto Retract" (Fig.33D)
and press "Enter" button to start the "Auto Retract"
sequence, which will retract all jacks. The Power
Tongue jack does not retract.
III. Manual Mode: Scroll to "Manual Mode"
(Fig.33E) and press "Enter" button to start
Manual Level operation.
Manual Mode Features
NOTE: Upon entering Manual Mode, a tutorial on
operating the jacks will appear on the screen. Press "OK"
to clear the tutorial. To delete the tutorial, click the "Don't
show this again" box in the bottom right of the screen.
A. Press "EXTEND" (Fig.37F) or "RETRACT" (Fig.37E)
and "FRONT" (Fig.37B) to operate front jacks.
B. Press "Extend" or "RETRACT" and "REAR"
(Fig.37D) to operate rear jacks.
C. Press "EXTEND" or "RETRACT" and "RIGHT"
(Fig.37C) to operate right jacks.
D. Press "EXTEND" or "RETRACT" and "LEFT"
(Fig.37A) to operate left jacks.
NOTE: To operate jacks individually, press "EXTEND"
or "RETRACT" then press the "LEFT" (Fig.37A) or
"RIGHT" (Fig.37C) button while simultaneously pressing
the "FRONT" (Fig.37B) or "REAR" button (Fig.37D),
depending on which jack needs to be operated.
21
Rev: 08.17 - GC
TT
®
TT Leveling OneControl
®
®
Touch Panel
®