Onecontrol Touch Panel Diagram; Ground Control; Installation And Owner's Manual - Lippert Components Ground Control TT Installation And Owner's Manual

OneControl Touch Panel Diagram

jack buttons in manual
mode See Fig.32
Callout Description
Jack Buttons - Select Front, Rear, Right and Left jacks to be operated depending on mode. Jacks
available to be operated will be highlighted in blue.
A
Only the Power Tongue Jack can be operated in Standard Mode (Fig.29). In Manual Mode
(Fig.32), all leveling jacks are available to be operated (no Power Tongue Jack operation available).
B Up and Down Arrows - Scrolls through options on screen.
C Info - Displays system information, e.g. angle, jack stroke or software version.
D Connected Icon - Press 6 times to program zero point/ wireless configurations.
E Home Icon - Returns screen to home page.
F Auto Retract - Enters Auto Retract mode to retract all jacks. Power Tongue Jack does not retract.
G Manual Mode - Enters Manual Mode to manually operate jacks.
H Enter - Push to select various modes.
I Retract - Retracts jacks in several modes. Jacks available will be highlighted in blue.
J Extend - Extends jacks in several modes. Jacks available will be highlighted in blue.
K Reset - Resets to factory default.
L Power Button - Turns touch panel on and off.
M Auto Level - Starts the Auto Level sequence.
N Auto Hitch - Returns trailer to previous hitch height for reconnecting to tow vehicle.
lippertcomponents.com
A
Fig.29
574-537-8900

Ground Control

Leveling OneControl
Touch Panel

Installation and Owner's Manual

(For Aftermarket Applications)
leveling in standard mode
C
B
I J K L M
15
Rev: 08.17 - GC
TT
®
D E
F
G
N
TT Leveling OneControl
®
®
H
Touch Panel
®