Power Wiring - Emerson FB1200 Quick Start Manual

Power Wiring

DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-
hazardous. Performing this operation in a hazardous area could result in an explosion.
The flow computer accepts DC power with an input voltage range from 5.7 to 30V. The
amount of power required depends on installed options.
If your device includes the 6-channel expansion I/O board your terminal block
includes eight connectors; if it does not, your terminal block includes six
connectors.
Note
The picture on the top shows wiring for units with the 6-channel expansion I/O board; the
picture on the bottom shows wiring for units without this board.
DC Power:

Emerson FB1200 Flow Computer Quick Start Guide
D301786X012
June 2018
27