4: Clone; Clone - Introduction; Mode - Logicube SuperSonix-NG User Manual

4.0 Clone - Introduction

This type of operation allows the cloning of a Master drive or image created by
the SuperSonix-NG to one or more Targets. There are three different clone
modes and several settings to choose from. These selections should be
performed in order from left to right. Within each mode, there are two ways
to perform the clone: Mirror and Clever.

Mirror – Performs a bit-for-bit copy of the Master drive or image.

Clever – Clones only sectors with data, skips blank sectors, and partitions can be
adjusted based on user settings to expand and fill the larger capacity Target drive.
There are four selections when performing an image: Mode, Master/Image File, Settings, and
Target.

4.1 Mode

Tap this icon to choose between the following three imaging modes:

Drive to Drive – Clones one Master drive to one or more Target drives.

Image to Drive – Restores SuperSonix-NG image files to one or more drives.
®
-NG User's Manual
Logicube SuperSonix

4: Clone

26