Username/Password; Software Update; Power Off - Logicube SuperSonix-NG User Manual

5.10 Software Update

New and improved software will be released from time to time
ways to update the software on the SuperSonix-NG: From the web via a
network connection or from a USB drive.
For the latest step-by-step instructions on how to update the SuperSonix-NG
software, please read the SuperSonix-NG SW Update Instructions file located on
the SuperSonix-NG Support page on the Logicube website at
https://www.logicube.com/knowledge/supersonix-ng.
In-depth information on updating the SuperSonix-NG software can be found in
Chapter 7: Updating/Loading/Re-loading the SuperSonix-NG

5.11 Power Off

There are two tabs in the Power Off screen:
POWER OFF – The SuperSonix-NG can be remotely restarted or turned off by going to this tab.
Additionally, the Graphical User Interface (GUI) can be refreshed.
DRIVE POWER – Inactive drives connected to the SuperSonix-NG can be set to go to standby
mode in this tab. The default is set to 0 minutes (OFF).
Logicube SuperSonix-NG™ User's Manual

5.9.3.2 Username/Password

If the proxy server requires a username and password for
authentication, tap the Username/Password icon to set this
information.
TYPES OF OPERATIONS
There are two
.
Software.
63