Deleting Log Files; Accessing The Logs Over A Network - Logicube SuperSonix-NG User Manual

3.5.2 Deleting log files

Log files can be deleted one at a time or all at once.

To delete a single log file, tap the log file to highlight the log file to be
deleted. Tap the Delete icon to delete the selected log file.

To delete all the log files, tap the Delete All icon.
A log file deletion password can be set to add a layer of security when deleting
log files. If a password was set, log files cannot be deleted without entering the
correct password.

If a log file deletion password was not created, a confirmation screen
will appear confirming to delete the single log file or all log files.

If a log file deletion password was created, a screen will appear
prompting to enter the log file deletion password. Enter the log file
deletion password. Tap the OK icon to delete the single log file or all the
log files (depending on which was selected).

3.5.3 Accessing the logs over a network

The log files can also be accessed through a network on a computer if the
SuperSonix-NG is connected on the same network.
1. Open Windows Explorer or a similar file browser window and browse to
the hostname or the IP address found in the Statistics screen. See
Section 5.6
Logicube SuperSonix-NG™ User's Manual
The password can be set in the Systems Settings. More
information about the log file deletion password can be
found in Section 5.8.2.
for more information on the Statistics screen.
QUICK START
22