Hpa, Dco - Logicube SuperSonix-NG User Manual

4.3.2 HPA, DCO

HPA and DCO is a setting that can be found in Drive to Drive and Drive to File.
Some computer manufacturers will use a utility that creates an HPA or DCO
configuration on a hard drive. These configurations are designed to change drive
characteristics such as drive capacity as seen by the computer's BIOS.
The HPA/DCO setting allows the user to set whether a drive's HPA or DCO is to
be unlocked and imaged. Select YES to unlock and image a Host Protected Area
(HPA) or Device Configuration Overlay (DCO).
Logicube SuperSonix-NG™ User's Manual
Log names and file names can be customized by entering a
Job/File Name. For example, if a clone operation is
performed, and the Job/File Name is set to TestJob, the log
name and file name will be called TestJob.
Subsequent Job/File Names that are the same will be
identified with a dash, then the next image number. For
example, TestJob-1, TestJob-2, etc.
CLONE
29