Forgotten Password Or Config Lock Key - Logicube SuperSonix-NG User Manual

Logicube SuperSonix-NG™ User's Manual

Logs – Since there are no settings or configurations for
this operation, it is not affected by Config Lock.

Statistics – Since there are no settings or configurations
for this operation, it is not affected by Config Lock.

Manage Repositories – A managed repository cannot
be added without the unlock key. A managed repository
can be deleted without the unlock key. A future
software update will require the unlock key to delete a
managed repository.

System Settings – This entire section cannot be
accessed without the unlock key.

Network Settings – This entire section cannot be
accessed without the unlock key.

Software Updates – This entire section cannot be
accessed without the unlock key.

Power Off – This entire section cannot be accessed
without the unlock key.
The Passwords can be saved into a profile
and loaded each time the SuperSonix-NG
is turned on. See
information on saving and loading a
profile.
The SuperSonix-NG can still be turned off
without the unlock key by using the
power button located on the top of the
SuperSonix-NG.
Remember the Config Lock Key! If the
SuperSonix-NG is configured to load with
the Config Lock set (enabled) the only
way to delete the Config Lock is to reset
the SuperSonix-NG using the Command
Line Interface (CLI).

5.8.2.2 Forgotten password or config lock key

If the Log File Deletion password or Config Lock key is forgotten,
the SuperSonix-NG will need to be reset using the Command
Line Interface (CLI). See Section 8.2
how to connect to the SuperSonix-NG using the CLI.
Once connected to the CLI:
TYPES OF OPERATIONS
Section 5.8.1 for more
for more information on
58