Table of Contents
Advertisement
8.6 Configuring the SuperSonix-NG with a static IP address
The SuperSonix-NG is DHCP enabled by default. Some networks do not support DHCP and
require a static IP address. The SuperSonix-NG can be configured with a static IP.
8.6.1 Step-by-step instructions – Static IP address
1. Select Network Settings from the types of operation on the left side.
2. Select the Interfaces tab.
3. Tap ETH0 to highlight it.
4. Tap Edit Configuration to edit the entry. The Edit Network Interface
5. Tap the Type box and select STATIC then tap the OK icon. The IP
Logicube SuperSonix-NG™ User's Manual
Configuration screen should appear.
SETTINGS box should now be selectable.
REMOTE OPRATIONS
75
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperSonix-NG and is the answer not in the manual?
Questions and answers