Related Manuals for Logicube OmniClone Xi
Summary of Contents for Logicube OmniClone Xi
- Page 1 ® Xi User’s Manual Logicube OmniClone Logicube, Inc. Chatsworth, CA 91311 Phone: 818 700 8488 Fax: 818 700 8466 Version: 3.1 Date: 12/08/14 MAN-OMNICLONEXI Logicube OmniClone® Xi User Manual...
-
Page 2: Logicube Omniclone Xi User's Manual
Logicube Disclaimer LOGICUBE IS NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO PROPERTY DAMAGE, LOSS OF TIME OR DATA FROM USE OF A LOGICUBE PRODUCT, OR ANY OTHER DAMAGES RESULTING FROM PRODUCT MALFUNCTION OR FAILURE... - Page 3 MUCH DETAIL AS POSSIBLE. AT LOGICUBE’S SOLE AND ABSOLUTE DISCRETION, REASONABLE TELEPHONE AND EMAIL SUPPORT MAY ALSO BE AVAILABLE FOR THE LIFE OF THE PRODUCT AS DEFINED BY LOGICUBE. EXCEPT AS OTHERWISE SPECIFICALLY PROVIDED IN THIS AGREEMENT, LOGICUBE PRODUCTS ARE...
-
Page 4: Rohs Certificate Of Compliance
LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. RoHS Certificate of Compliance LOGICUBE PRODUCTS COMPLY WITH THE EUROPEAN UNION RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRONIC EQUIPMENT, ROHS DIRECTIVE (2002/95/EC). THE ROHS DIRECTIVE PROHIBITS THE SALE OF CERTAIN ELECTRONIC EQUIPMENT CONTAINING SOME HAZARDOUS SUBSTANCES SUCH AS MERCURY, LEAD, CADMIUM, HEXAVALENT CHROMIUM AND CERTAIN FLAME-RETARDANTS IN THE EUROPEAN UNION. -
Page 5: Table Of Contents
OGICUBE ECLARATION OF ONFORMITY RROR OOKMARK NOT DEFINED TABLE OF CONTENTS ..........................V 1. INTRODUCTION TO THE LOGICUBE OMNICLONE XI .............. 1 ............................1 NTRODUCTION Features ..............................2 Using this guide ............................ 3 System description ..........................3 2. GETTING STARTED (FAST START) ....................7 ................ - Page 6 Breakdown of Config.txt ..........................44 Database.csv..............................45 Database Step–by-Step ........................46 Database Settings Menu ........................47 Creating a New Config List, Step-by-Step ...................... 48 Printing a Database File ..........................48 Barcode Scanner ..........................50 Barcode Scanner Settings ..........................51 Logicube OmniClone® Xi User’s Manual...
- Page 7 ALUE Preparing the Checksum.txt File......................67 ....................68 OW TO USE THE ERIFICATION TATION Generating the Master MD5 Hash Value using the OmniClone Xi .............68 Cloning and Verifying in One Session ....................69 Verification Scanning Separately ......................70 12. COMBO STATION ..........................71 ............................71 NTRODUCTION ............................71...
- Page 8 FAQ’ ...............................76 ........................79 ROUBLESHOOTING UIDE 15. REFERENCE ............................82 ..............................82 LOSSARY 16. INDEX ..............................88 .......................90 ECHNICAL UPPORT NFORMATION Logicube OmniClone® Xi User’s Manual VIII...
-
Page 9: Introduction To The Logicube Omniclone Xi
Hundreds of different types of file systems have been designed through the years. Only a handful The Logicube OmniClone® Xi is available in 2, 5 and 10 Target drive configurations. Logicube OmniClone® Xi User’s Manual... -
Page 10: Features
NTFS – Supported by Windows NT, 2000, XP, Vista,and 7. Offers improved access speed, and some security and recoverability features. The Logicube OmniClone Xi is “aware” of the above three file systems and will clone them over “intelligently”. Features Clones any IDE, EIDE (PATA) or Serial ATA Drive. -
Page 11: Using This Guide
It is recommended that you practice with a scratch drive to fully appreciate all of the features. System description The complete Logicube OmniClone Xi system includes the following: The Logicube OmniClone Xi unit. For the OC2Xi, three (3) UDMA IDE... - Page 12 Caution: Avoid dropping the Logicube OmniClone® Xi or subjecting it to sharp jolts. When in use, place it on a flat surface. Caution: Keep the unit dry. If you need to clean your Logicube OmniClone® Xi, use a lightly damp, lint free cloth. Avoid using soap or other cleaning agents particularly those containing bleach, ammonia, alcohol or other harsh chemicals.
- Page 13 INTRODUCTION Figure 1. Logicube OmniClone Xi Logicube OmniClone® Xi User’s Manual...
-
Page 15: Getting Started (Fast Start)
2. Getting Started (Fast Start) Applying power to the Logicube OmniClone Xi The Logicube OmniClone Xi is able to detect whether an IDE (PATA) or Serial ATA (SATA) drive is attached to the Master or Target positions. The unit is capable of cloning to/from a SATA drive to an IDE drive and vice versa (as well as IDE to IDE and SATA to SATA). -
Page 16: Connecting Serial Ata (Sata) Drives
4. Follow steps 1 – 3 to attach drives to the Target positions of the Logicube OmniClone Xi. 5. Connect the AC Power Cord to the back of the Logicube OmniClone Xi and power-up the unit. In 2 – 3 seconds, the main “Splash” screen appears. Connecting other types of drives... -
Page 17: Power And Reset Buttons
GETTING STARTED Power and Reset buttons The Logicube OmniClone 5Xi and 10Xi include one On/Off switch and one reset button. The power switch is a rocker switch that is located on the unit’s power supply. The reset button is located on the back of the unit underneath the Compact Flash Drive slot. -
Page 18: Touch Screen
GETTING STARTED Touch Screen The OmniClone Xi features an LCD Touch Screen that allows the user to quickly input commands. This screen replaces many of the buttons that were present on older Logicube duplication products. The screen is bright and easy to read. It also emits an audible beep every time the touch screen is tapped. -
Page 19: Indicator Lights
“error” tone. NOTE: Changing the config.ini file that is located on the OmniClone Xi’s CF Card can turn off the buzzer. Please refer to Section 9 – Compact Flash (CF) Card for more information. -
Page 20: Installing And Removing The Light Bar
2. Attach the light bar’s power cable to the six-hole Molex™ connector that is located on the back of the unit to the right of the Compact Flash Drive slot. 3. Light bar removal is the opposite of installation. Logicube OmniClone® Xi User’s Manual... -
Page 21: Cloning Modes And Settings
3. Cloning Modes and Settings Main Menu Screen The main menu screen appears when the Logicube OmniClone Xi is first powered up. It displays the Title Screen and the Time/Date. It also displays two menu options: About and Drives. Time/Date Settings The OmniClone Xi has a real-time clock that keeps track of the correct time and date. -
Page 22: About Screen
The most frequently used cloning modes, and provide step- by-step instructions for each. CleverCopy and MirrorCopy Mode come standard with the OmniClone Xi. Selective Clone, Master Manager™, NTFS CleverCopy and Logicube OmniClone® Xi User’s Manual... -
Page 23: Cloning To Target Drives Greater Than 2Tb
NTFS “dirty bit” and its role in verifying NTFS partition data. Please read this section if you are cloning NTFS drives with NTFS CleverCopy mode. NOTE: Each time the Logicube OmniClone Xi is rebooted the cloning mode and preference settings are saved from the last cloning session. -
Page 24: Clevercopy Step-By-Step
The available methods are: CleverCopy – Allows the OmniClone Xi determine the best (usually fastest) way to clone. It works with all FAT16/FAT32 and NTFS type partitions. Note that not all modes are available for all partition types. -
Page 25: Selective Partitions™ Step-By-Step
6. Scroll to other partitions and repeat Step 5. Note that it is OK to assign unique cloning modes to each selected partition. 7. When finished, tap the “OK” icon. The Selective Clone™ settings screen will appear. Logicube OmniClone® Xi User’s Manual... - Page 26 If you wish to change the last used settings (and the MASTER drive did not change), follow the “Selective Partitions Step-by-Step” instructions above. Logicube OmniClone® Xi User’s Manual...
-
Page 27: Mirrorcopy Mode
For example, setting the percentage to 50% will mirror the first 50% of the Master drive’s size. MirrorCopy Step-by-Step 1. From anywhere in the menu system press the “Set” button to enter the Settings menu. Logicube OmniClone® Xi User’s Manual... -
Page 28: Master Manager Mode (Optional)
The Master Manager mode is also useful for creating backups of drive partitions containing important data. The Logicube OmniClone Xi can hold up to 24 partitions on one Master Manager drive. Drives greater than 2TB in capacity have been successfully tested with the Master Manager mode. -
Page 29: Master Manager Step-By-Step
1. Attach your original Master drive to the Master position of the Logicube OmniClone Xi. Attach your Master Manager drive to the Target 1 position of the Logicube OmniClone Xi. -
Page 30: Cloning Windows 7
This section will discuss the best ways to clone Windows 7 hard drives. Mirror Copy Mode The OmniClone Xi supports the cloning of Windows 7 drives in the standard Mirror Copy Mode. No special instructions are required. Clever Copy Mode... - Page 31 Operating System partition. The following steps are necessary for creating correct and bootable clones: 1. Use Selective Partitions™ mode. 2. The Logicube OmniClone Xi will report two partitions. They should be cloned as follows: a. 100 MB NTFS: Mirror (Keep Size may be used as a second option) b.
-
Page 32: Background Information
‘C:’ within the drive the same. The same reasoning goes for the other scenarios above; this is why we always keep the starting offset of ‘C:’ the same as the master drive. Logicube OmniClone® Xi User’s Manual... -
Page 33: Cloning Windows Vista
Basic, Windows Home Premium, Windows Business and Windows Ultimate). NOTE: Software dated November 2007 or later and NTFS CleverCopy mode need to be installed on the OmniClone Xi in order to CleverCopy Windows Vista. Vista Installations The following Vista installations are supported by CleverCopy mode: Upgrade of a Windows XP SP2 drive. -
Page 34: Vista With Re (Recovery Environment)
No special handling is required. Master Manager™ In order to create a valid Master Manager™ drive with Vista partitions, it is absolutely necessary to apply the Bcdedit treatment to each Master drive prior to cloning. Logicube OmniClone® Xi User’s Manual... -
Page 35: Reference
5. Now shut down the computer and disconnect the Master drive. Your Master drive is now ready for cloning. Reference . Option - Master Drive BCD Vista Preparation Edit the BCD (Boot Configuration Data) file in the following way: Logicube OmniClone® Xi User’s Manual... -
Page 36: Nd . Option - Sysprep Instructions
Right-click it and run it as an administrator (or with elevated rights). 3. Set the Cleanup Action to OOBE, and choose to Shutdown after the roll back, as shown in the following screenshot: Logicube OmniClone® Xi User’s Manual... -
Page 37: Optional Preference Settings
Settings menu, which can viewed at anytime from anywhere in the menu system by pressing the Set button. NOTE: Not all preference settings are available in every cloning mode. Logicube OmniClone® Xi User’s Manual... -
Page 38: Verify (Pio Speeds Only)
CLONING MODES AND SETTINGS Verify (PIO Speeds only) The Verify preference allows you to choose whether the Logicube OmniClone Xi scans the Target drives for bad or weak sectors. With Verify activated, the OCXi scans target drives during the cloning process. -
Page 39: Geometry
(over 528 MB) capacity drives. CHS Translation Modes Following are the CHS translation modes supported by the OmniClone Xi: LBA (Default) – This CHS Mode will work for most hard drive and PC combinations and should be used unless otherwise indicated. -
Page 40: The Ntfs Dirty Bit
Legacy motherboards that cannot support drives larger that 8.5 GB. LBA-1, LBA-2, Large-1 and Large-2 – These settings instruct the Logicube OmniClone Xi to “shave off” one or two cylinders from the total drive size when constructing the Target partition tables. -
Page 41: How To Turn The Feature On Or Off
Abort - This mode will cause the Logicube OmniClone Xi to halt if an error such as a bad drive sector is encountered. NOTE: The Omnidiagnostics™ option must be installed before the On Error settings can be accessed. -
Page 42: On Error Step-By-Step
OmniClone Xi, contact Logicube to purchase a license key that is unique to your unit. Once you have obtained the license key, follow this procedure to enter it into your Logicube OmniClone Xi. Set Option Step-by-Step 1. From anywhere in the menu system, press the Set button to enter the Settings menu. -
Page 43: Last Drive
This setting allows the user to determine the maximum number of Target drives that can be cloned on the OmniClone Xi unit at one time. For example, an OC10Xi that normally clones 10 Target drives can be set to clone 5 drives. Only the first 5 Target positions would be active while the remaining Target positions would be turned off. -
Page 44: Guid Partition Table (Gpt) Drives
2TB in capacity. OmniClone Xi supports cloning GPT drives with software version 1.7RC52 and newer. OmniClone Xi can clone an MBR drive to another drive and the resulting drive will be MBR. OmniClone Xi can also clone GPT drives to another drive and the resulting drive will be GPT. - Page 45 YES icon since the Master drive is GPT. 10. The status screen will appear and cloning will begin. 11. The OmniClone Xi will notify you when cloning has completed. POST CLONING NOTES: If the Target drive does not boot up, a third party utility or ‘shell’...
- Page 46 In the example below, “Z” is the volume or drive letter the Operating System is currently on. mountvol z:\ /S bcdedit /set {bootmgr} device partition=z: bcdedit /set {memdiag} device partition=z: bcdedit /set {default} device partition=c: bcdedit /set {default} osdevice partition=c: Logicube OmniClone® Xi User’s Manual...
-
Page 47: Omnidiagnostics
NOTE: Omnidiagnostics is an option that can be purchased for your OmniClone Xi unit. Please contact Logicube if you wish to purchase any of the option packages. Omnidiagnostics Features Scan Target Mode Scan Target mode scans the Target drives for weak and bad data sectors. -
Page 48: Scan Target Mode Step-By-Step
4. Adjust the “SPEED” setting as needed. 5. You may now press the “Start/Stop” button twice to start the Scan Target process. 6. When finished, the Logicube OmniClone Xi will notify you and display a list of the scanned drives along with bad or weak sectors found on each drive. -
Page 49: Wipeclean Target Mode
If you are ready to do this, choose “Yes” to continue. 5. When finished, the Logicube OmniClone Xi will notify you and display a list of the scanned drives along with bad, weak and repaired sectors found on each drive. -
Page 50: Wipeclean Target Step-By-Step
If “<Yes>” is chosen, the WipeClean™ Target operation will begin and a status screen will appear. 8. The Logicube OmniClone Xi will notify you when erasing is complete. Tap the Back icon to return to the main menu. Logicube OmniClone® Xi User’s Manual... -
Page 51: The Database/Barcode Option
Barcode Scanner. NOTE: The Database/Barcode option can be purchased for your OmniClone Xi unit. Please contact Logicube if you wish to purchase any of the option packages. System Contents When the Logicube Database/Barcode option is... -
Page 52: Breakdown Of Config.txt
Barcode Scanner is used. Config lists can be created with the OmniClone Xi, (or from a text editor like Notepad.exe). The lists are stored together in a file called Config.txt. This file is stored on the CF drive. -
Page 53: Database.csv
TargetMD5 – This records the MD5 hash values for each of the Destination drives by position location. Database.csv The Logicube Database™ option writes all of the collected information for a given operation to incremental files named DAT###.csv. The “csv” extension stands for “comma separated values” and is a common Database format. -
Page 54: Database Step-By-Step
Barcode Scanner will be discussed later in the section. 1. Attach the Barcode Scanner to the PS/2 Port on the front of the OmniClone Xi unit. 2. Insert the Compact Flash (CF) Drive in the CF Slot and power up the unit. -
Page 55: Database Settings Menu
Database program of your choice. Use USB Mode to gain access to your CF drive. Database Settings Menu The Logicube Database™ Menu is made up of five different settings: Select Config – This setting allows the user to choose a Config List from the Config.txt file. A checkmark appears next to the selected list. -
Page 56: Creating A New Config List, Step-By-Step
Printing a Database File After a cloning session with the Database enabled is completed, the database file can be printed using any of the two methods below: Logicube OmniClone® Xi User’s Manual... - Page 57 THE DATABASE/BARCODE OPTION Method 1 – Using the OmniClone Xi and a USB cable: 1. Connect a USB (type-B) cable from the back of the OmniClone Xi to a Windows based computer. A USB cable was included with the OmniClone Xi when it was purchased.
-
Page 58: Barcode Scanner
Barcode Scanner The Barcode Scanner is used to enter data that is not accessible from inside the OmniClone Xi unit. The data could include things such as an Operator Badge number or other data that is in barcode form. -
Page 59: Barcode Scanner Settings
To use the settings below, just scan them with the Barcode Scanner while it is plugged into the OmniClone Xi unit and powered up. The scanner will emit a double-beep when it reads the barcode. NOTE: The Database™ function does not need to be running for the Barcode scanner to scan Factory Settings. - Page 60 NOTE: Advanced barcode settings are available in the User’s Manual that is included with your Barcode Scanner. It is not advised to use these settings as they may interfere with the functionality of the Barcode Scanner on the OmniClone Xi. Logicube OmniClone® Xi User’s Manual...
-
Page 61: The Serial Link Option
7. The Serial Link Option Introduction The Logicube Serial Link Option gives your OmniClone Xi the ability to receive commands from a PC. This allows the operator to control the unit from a remote terminal, and even control multiple units from the same terminal. -
Page 62: Serial Link Setup Step-By-Step
THE SERIAL LINK OPTION Serial Link Setup Step-by-Step 1. Verify that the Serial Link option is enabled on the OmniClone Xi by checking the About Screen. 2. Power the OmniClone Xi unit OFF. 3. Connect one end of the Serial Link cable to the ps/2 port on the OmniClone Xi. -
Page 63: Serial Link Commands
This is only useable when the unit is not cloning. NOTE: Starting a cloning session will automatically turn off USB mode. O – Turn USB mode OFF and disconnect CF drive from Windows (without starting a cloning session). Logicube OmniClone® Xi User’s Manual... -
Page 64: Other Notes
Each command that is successfully received by the unit will echo back to the PC in <> brackets. Example: <C1> means that a successful Start command was sent to the OmniClone Xi unit. Logicube OmniClone® Xi User’s Manual... -
Page 65: Using The Usb Port
8. Using the USB Port Introduction The integral USB port on your Logicube OmniClone Xi provides connectivity of your CF drive or Master hard drive (the unit’s Master drive) to any USB- enabled PC. Both USB 1.1 and USB 2.0 are supported. -
Page 66: Removing Usb Devices
Removing USB devices Before physically disconnecting the USB cloning adapter and/or shutting down power to the Logicube OmniClone Xi, the unit has to be properly "unmounted" from Windows. For instructions on how to safely remove or disconnect USB devices from Windows, please consult your Operating System’s help files. -
Page 67: Compact Flash (Cf) Card
Compact Flash” which is found in Section 13: Software Loading Instructions. Inserting and Removing the Compact Flash 1. At the back of the Logicube OmniClone Xi is a Compact Flash (CF) slot. Make sure that it is clear. 2. Hold the CF card so that the Logicube label faces up. -
Page 68: Connecting Through The Software Setup Menu
Removing USB devices Before physically disconnecting the USB cloning adapter and/or shutting down power to the Logicube OmniClone Xi, the unit has to be properly "unmounted" from Windows. For instructions on how to safely remove or disconnect USB devices from Windows, please consult your Operating System’s help files. -
Page 69: Config Ini File
2007). 2. Turn the “Dirty Bit” Activation ON or OFF. Audible Buzzer The OmniClone Xi’s Light Bar has an audible buzzer that sounds whenever a cloning session is complete or the unit stops with an error. For units purchased before 2007, this buzzer can be turned ON and OFF in the Config.ini file:... -
Page 70: 10. User Replaceable Hardware
10. User Replaceable Hardware Introduction Many of the components that make up the Logicube OmniClone Xi are designed to be removable by the user. This includes drive cables, drive stations and even the power supply itself. This is beneficial in a... -
Page 71: Drive Stations
DO NOT twist or pull by the cable as this will shorten cable life. Drive Stations The “Drive Stations” of the OmniClone Xi refer to the connection plates of each Master and Target position. These plates are very rugged and able to withstand thousands of cloning sessions. -
Page 72: Power Supply
USER REPLACEABLE HARDWARE Note: The OmniClone Xi can operate properly with one or more Drive Stations detached from the unit. Power Supply The OC10Xi and OC5Xi models have an internal power supply that can also be replaced by the user. -
Page 73: 11. Verification Station
11. Verification Station Introduction The Logicube Verification Station is designed to attach directly to your OmniClone® Xi HDD Duplication device. It looks and acts like the standard Drive Station except that it has an additional feature. The Verification Station is able to scan a drive and verify the data of a set number of sectors. -
Page 74: Generating The Master Md5 Hash Value
Master drive, and stored in a file called “checksum.txt” that resides on the Compact Flash (CF) card of the OmniClone Xi. After a Mirror Cloning session, the Target drives should all have MD5 values that match the Gold Master MD5 hash value. -
Page 75: Preparing The Checksum.txt File
1 from the sector value listed in the CHECKSUM.TXT to establish the correct sector range to match the Logicube OmniClone Xi. Preparing the Checksum.txt File The checksum.txt file tells the MD5 Verification Station two important values. -
Page 76: How To Use The Verification Station
CF drive in a card reader or through the USB port of the OmniClone Xi. How to use the Verification Station Generating the Master MD5 Hash Value using the OmniClone Xi 1. Attach the Master drive to the Target 1 Verification Station. -
Page 77: Cloning And Verifying In One Session
Drive Station will be ignored. 8. When the verification process finishes, the OmniClone XI will display a PASS or FAIL message. If there are any drives that failed the MD5 verification process, the location will be displayed on the screen. For example, “The following drives failed MD5:... -
Page 78: Verification Scanning Separately
Standard Drive Stations will be ignored. 7. When the verification process finishes, the OmniClone XI will display a PASS or FAIL message. If there are any drives that failed the MD5 verification process, the location will be displayed on the screen. For example, “The following drives failed MD5:... -
Page 79: 12. Combo Station
1.8” drives PCMCIA (CardBUS) drives Compact Flash (CF) drives How to Install 1. Turn off the power to the OmniClone Xi and unplug the power supply cord. 2. Remove the drive and any cables from the Standard Drive Station. 3. Loosen the two thumb-screws located on either side of the Drive Station. -
Page 80: How To Use The Combo Station
3. Gently insert the drive into the slot until it slides into place. DO NOT FORCE the drive as bent or broken pins can result. 4. Follow the instructions in your OmniClone Xi manual to clone your drive. 2.5” drives 1. -
Page 81: Notes
Do not drop any foreign objects into the Combo Station; this can result in damage to the Combo Station, drive or the OmniClone Xi itself. Never attach more than one drive at a time to the Combo Station. This can result in damage to the drives. -
Page 82: 13. Software Loading Instructions
Compact Flash (CF) Drive. 1. Remove the Master Drive from the unit if it is connected. 2. With the OmniClone Xi turned off, press and hold down the Start/Stop button then turn the OmniClone Xi on. The unit will boot to the Software Setup Menu. - Page 83 8. Once the screen has been calibrated, the contrast adjustment screen will appear. Adjust the contrast as needed. Next, tap the Back icon. The OmniClone Xi will return to the Main Menu Screen. 9. Check the version and date of this software by pressing the “About”...
-
Page 84: 14. Frequently Asked Questions And Answers
Q. Does the Logicube OmniClone Xi support Western Digital(R) "Advanced Format" drives with 4K (4,096 bytes) sectors? A. Yes. The Logicube OmniClone Xi supports these type of drives. Please check with Western Digital(R) to find out if your hard drive model has this feature. - Page 85 Q: Can the Logicube OmniClone Xi clone between dissimilar drives? A: Yes. For Master drives that contain FAT16, FAT32 and NTFS partitions, the Logicube OmniClone Xi will take care of all the necessary adjustments to ensure that a Target drive of any size will be valid and bootable.
- Page 86 On the Target drive, with the Verify setting enabled, the Logicube OmniClone Xi will also skip over any bad sectors. If the Verify setting is disabled, the Logicube OmniClone Xi will not detect bad sectors on the Target and the cloning procedure will continue regardless.
-
Page 87: Troubleshooting Guide
The type of cloning operation performed can also affect transfer speeds. When cloning FAT16 partitions, it is sometimes necessary to change the cluster class of the partition. In such cases, the Logicube OmniClone Xi utilizes a more complex method of ensuring it creates a valid Target drive. - Page 88 Defragment cannot handle the increased number of clusters that exist when Targets larger than 8 GB have been cloned from Master drives smaller than 8 GB. To prevent the problem from occurring, change the Logicube OmniClone Xi default CleverCopy mode to Selective Partitions™. Then select the Defragment copy method for the partition(s) you wish to clone.
- Page 89 Q: Why does the cloning session stop with an “Invalid MBR” error message? A: This error comes up when the partition table or boot sector contains corrupt data. Despite the error, the Master drive may still boot in a PC. Logicube OmniClone® Xi User’s Manual...
-
Page 90: Reference
FAT table. CRC (Cyclic Redundancy Checking) A method of checking for errors in data transmitted from one device to another, e.g. from one hard Logicube OmniClone® Xi User’s Manual... - Page 91 95 is called FAT16. The FAT table for Windows 95 OSR2 or newer, Windows 98 and Windows ME is called FAT32. FAT16 allows for a maximum of 65,536 clusters while FAT32 allows for enough clusters to support up to two terabytes of data. Logicube OmniClone® Xi User’s Manual...
- Page 92 BIOS. To use, it must be supported by both the BIOS and the drive. Master Drive, Logicube OmniClone Xi The hard drive from which the Logicube OmniClone Xi is copying data to the Target drive. The Master drive is commonly the one placed inside the Logicube OmniClone Xi.
- Page 93 REFERENCE Not to be confused with Logicube OmniClone Xi Master Drive. NTFS (New Technology File System) The standard file system of the Windows NT operating system. It offers a number of performance, extendibility, and security improve- ments over the File Allocation Table (FAT).
- Page 94 SMART is capable of notifying the user. Target Drive, Logicube OmniClone Xi The hard drive to which the Logicube OmniClone Xi copies the contents of the Master drive. The Target drive is commonly the one connected externally to the Logicube OmniClone Xi.
- Page 95 USB 1.x, both using the same cables and connectors. Wiping, Data The process of securely erasing information from a hard drive using a utility that writes a defined or random pattern of data one or more times onto every sector. Logicube OmniClone® Xi User’s Manual...
-
Page 96: 16. Index
Disclaimer, Liability Limitation, II Hard Drive, Western Digital, 81 Disclaimer, Liability Limitations, II HDD, Hard Disk Drive, 67, 73, 80, 81 HPFS, 81, 83 DiskOn Modules, 31 Display, LCD, 10 Hyper Terminal, 55, 56, 57 Logicube OmniClone® Xi User’s Manual... - Page 97 Setting, Set Option, 33, 35, 45, 55 On Error, Recover, 34, 82, 84 Setting, Speed, 31, 85 On Error, Retry, 34 Setting, Verify, 16, 18, 21, 30, 34, 40, 56, 57, On Error, Skip, 34 83, 86 Logicube OmniClone® Xi User’s Manual...
-
Page 98: Technical Support Information
WipeClean™ Target Mode, 21, 42, 43, 92 USB 1.x, 59, 92 Technical Support Information For further assistance please contact Logicube Technical Support at: (001) 818 700 8488 7am-5pm PST, M-F (excluding US legal holidays) or by email to techsupport@logicube.com Logicube OmniClone® Xi User’s Manual...