Format; Job Info - Logicube SuperSonix-NG User Manual

5.3.3 Job Info

Job Info allows users to enter information about the job. This is optional and is
not required to start an operation.
Information entered here will appear in the logs. More information on the Job
Info screen can be found in
Logicube SuperSonix-NG™ User's Manual

RANDOM – Instructs the SuperSonix-
NG to automatically select one random
value (one byte) which will be used to
fill the entire drive on all Logical Block
Addresses (LBAs) / sectors.

RANDOM BUFFER – Instructs the
SuperSonix-NG to create an 8MB block
filled with random values (each byte in
the 8MB block will contain a random
value). The 8MB block will be written
repeatedly to fill the entire drive.

VALUE – Instructs the SuperSonix-NG to
use the specified hex value to be
written for the pass. The values can
range anywhere from 00 to FF.

5.3.2.3 Format

Formats the Target drive to prepare it to be used as a repository
for images (Drive to Image operations). The drive can be
formatted with the NT File System (NTFS) or EXT4 file system.
When cloning using the Drive to Image mode the
SuperSonix-NG will check the Target drive for
formatting. If the drive has not been formatted by
the SuperSonix-NG, a prompt will appear to
format the drive.
Section 4.3.1.
TYPES OF OPERATIONS
46