Clone; Hash; Target - Logicube SuperSonix-NG User Manual

5.1 Clone

The SuperSonix-NG has three modes of operation to clone virtually any drive
(Hard Disk Drives or Solid State Drives). Drives can be cloned using Mirror (bit-
for-bit copy) or Clever (copies only data areas, skips blank sectors, and
partitions can be resized).
Details on the different screens found in the Imaging operation can be found in
Clone.

5.2 Hash

Any drive connected to the SuperSonix-NG can be hashed. Performing a hash
operation will instruct the SuperSonix-NG to calculate the hash for the
specified drive or compare the hash value to an expected value entered by the
user.
There are three selections when performing a Hash or Verify: Target, Settings, and Job Info.
When the SuperSonix-NG finishes hashing the drive, the 'COMPLETED' screen will appear
showing the task completed.
Tap the Info icon on the left of the completed screen to see both the expected hash value and
the computed hash value.

5.2.1 Target

Tap this icon to select which drive(s) will be hashed or verified. The SuperSonix-
NG will show all connected Master and Target drives. Tap the drive to be hashed
then tap OK.
Logicube SuperSonix-NG™ User's Manual
TYPES OF OPERATIONS
Chapter 4:
39