Target; Settings - Logicube SuperSonix-NG User Manual


Secure Erase – Sends a command to the drive instructing it to perform a secure erase
based on the drive manufacturer's specifications for the secure erase command.

Wipe Patterns – Allows the user to set a specific pattern to use for wiping the drive. The
number of passes is customizable (up to 7 passes) along with the type of data written
for each pass. In addition, a 7-pass DoD wipe can be set with pre-selected pass values.

Format – Formats the Target drive with an EXT4 file system or NT file system (NTFS).
There are three selections when performing a wipe: Target, Settings, and Job Info.

5.3.1 Target

Tap this icon to choose a drive to erase, wipe, and/or format.
A screen will appear, allowing the selection of one or more Targets. Tap the
drive(s) to be erased, wiped, and/or formatted then tap OK.

5.3.2 Settings

Tap this icon set the wipe settings. The Wipe Settings screen will appear.
There are three sections in the Settings screen: Secure Erase, Wipe Patterns,
and Format.
Logicube SuperSonix-NG™ User's Manual
TYPES OF OPERATIONS
42