Table of Contents
Advertisement
7: Updating/Loading/Re-loading the SuperSonix-NG Software
7.0 Updating/Loading/Re-loading New Software – Introduction
New and improved software will be released from time to time and will always be available on
the SuperSonix-NG support page. Browse to http://www.logicube.com. Point your mouse to
Tech Support and select Product Knowledge Base.
7.1 Updating/Loading/Re-loading New Software Instructions
There are two methods of how to update the SuperSonix-NG software:
A. FROM NETWORK – Via the Internet through a network connection
B. FROM USB DRIVE – Via software file download onto a USB drive flash.
The actual software installation will take about 5 minutes. If FROM NETWORK was
chosen, the total time can exceed 10 to 20 minutes (or longer) depending on
Internet speeds and Internet traffic.
7.1.1 From Network – Via the web
1. Connect the SuperSonix-NG to a network with Internet access. Set the
2. From the main menu on the SuperSonix-NG, tap the down arrow twice
3. Select From Network. The SuperSonix-NG will check for a newer version
4. Tap the Update icon to begin the update. A confirmation screen will
5. Do not interrupt the update process. It may take several minutes. Once
6. Reboot the SuperSonix-NG by turning the unit off then back on using
®
-NG User's Manual
Logicube SuperSonix
proxy settings (IP settings) if necessary. Attach a network cable to the
back of the SuperSonix-NG.
The SuperSonix-NG is DHCP
enabled by default.
then tap the Software Updates icon. A screen will appear showing the
current version of software installed towards the top of the screen.
on the web. If one is found, it will display the version on the screen and
the Update icon will be selectable.
appear. Tap Yes to continue the update.
completed, a 'Successful' screen will appear.
the Power switch in the back of the unit.
68
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperSonix-NG and is the answer not in the manual?
Questions and answers