Step-By-Step Instructions - Clone - Logicube SuperSonix-NG User Manual

3.1.1 Step-by-step instructions – Clone
1. Select Clone from the types of operation on the left side then tap the
Mode icon and select one of the available modes then tap the OK icon.
2. Depending on your selection on step 2, tap Master to choose the
master drive or Image File to choose an image to restore. Tap the OK
icon to continue.
3. Tap Settings and adjust any of the settings as needed (Job Info, Clone
Method Settings, HPA/DCO, Error Handling, and Hash/Verification. Tap
the OK icon to continue.
4. Tap Target and select on or more of the target locations. Tap the OK
icon to continue. Tap Start to start the cloning task.
Logicube SuperSonix-NG™ User's Manual
Details on each selectable option on the Image screen can be
found in Chapter 4.0 Clone.
Log file names can be set in Settings in the Job Info screen
by entering a Job name. See
information.
The SuperSonix-NG will convert any non-POSIX portable
characters used in Job Name field to underscores
"_" when creating the log or file names.
POSIX portable characters are:
Uppercase A to Z
Lowercase a to z
Numbers 0 to 9
Some characters are not valid for a File Name, restricted
by the file system (for example: dash, colon, parentheses,
or forward slash).
QUICK START
Section 4.3.1 for more
Period (.)
Underscore (_)
Hyphen/Dash (-)
15