Clone Method Settings; File Image Method Settings - Logicube F-FALCON-SA User Manual

Hard drive forensics tool

Table of Contents

Logicube Forensic Falcon™ User's Manual

5.0.3.4 Clone Method Settings

When Drive to Drive mode is selected, Clone Method Settings

will appear on the top-right of the Settings screen. Tap Clone

Method Settings and the following screen will appear:



Length – Set the percentage or number of blocks to

clone. For forensic purposes, this is typically set to 100%

of the Source.



Master Start – Set the percentage or number of blocks

from the start of the Source (Master). For forensic

purposes, this is typically set to 0%, or the beginning of

the Source (Master).



Target Start – Set the percentage or number of blocks

from the start of the Destination (Target). For forensic

purposes, this is typically set to 0%, or the beginning of

the Destination (Target).

The specific number of blocks can be set

for each of the options by tapping the:

(edit) icon.

When Drive to File mode is selected, File Image Method

Settings will appear on the top-right of the Settings screen. Tap

File Image Method Settings and the following screen will

IMAGING

Table of Contents

Do you have a question about the F-FALCON-SA and is the answer not in the manual?

Forensic falcon