5.8.3 Language/Time Zone
The SuperSonix-NG's menu system's language can be changed. The available
languages are English, Chinese (中文), Korean (한국어), and Japanese (日本語).
This screen also allows the time zone to be set.
Logicube SuperSonix-NG™ User's Manual
1. Login with the username "it" (without the quotes) and
the password "it" (without the quotes).
2. From the main prompt, type command then press the
enter key.
3. Type config then press the enter key.
4. Type db list then press the enter key. This will show a
list of databases or configurations saved. The example
below shows two databases (the default initial.db and
Lock.db). The db that shows an asterisk (*) before the
name is the current database or configuration being
loaded each time the SuperSonix-NG is turned on.
5. Type db load initial.db then press the Enter key to load
the default database. There should be a response
showing "Command (DbManagement) Successful".
6. Type db list again and there should be an asterisk (*) on
initial.db.
7. Turn the SuperSonix-NG off using the power switch
located in the back of the device, and close the
Telnet/SSH application.
8. Wait for the SuperSonix-NG to completely turn off then
turn it back on. When the SuperSonix-NG boots up, it
will load the default configuration. The default
configuration can be checked by going to System
Settings and looking at the Profiles tab. INITIAL.DB
should have an asterisk next to it.
TYPES OF OPERATIONS
59
Need help?
Do you have a question about the SuperSonix-NG and is the answer not in the manual?