Hash Values; Lba; Length; Target Start - Logicube SuperSonix-NG User Manual

5.2.3 Job Info

Job Info allows users to enter information about the job. This is optional and is
not required to start an operation.
Information entered here will appear in the logs. More information on the Job
Info screen can be found in

5.3 Wipe

This type of operation allows the user to erase, wipe, and/or format one or
more Target drives. There are three main settings: Secure Erase, Wipe
Patterns, and Format.
Logicube SuperSonix-NG™ User's Manual

5.2.2.1.2 Hash Values

By default, this value will have 0s (zeros). If this
is not changed, or no value is entered, this will
instruct the SuperSonix-NG to hash the drive
using the selected algorithm in the previous
step. If a value is entered, the SuperSonix-NG
will hash the selected drive and verify hash with
the value entered/edited.
To set the expected value, tap the edit icon. The
on-screen keyboard will appear and the
expected hash value can be set.

5.2.2.2 LBA

The LBA icon will bring up the LBA settings screen. On this
screen, the user can adjust the percentage or the number of
blocks of the drive to hash and where to start the hash.

5.2.2.2.1 Length

Users can specify the length (in LBAs) of the
drive to be hashed. By default, the length is set
to 100% (whole drive).

5.2.2.2.2 Target Start

Users can also specify where to start the hash.
By default, this is set to 0% (the first LBA of the
drive).
Section 4.3.1.
TYPES OF OPERATIONS
41