Hpa/Dco; Lba; Passes - Logicube SuperSonix-NG User Manual

Logicube SuperSonix-NG™ User's Manual
TYPES OF OPERATIONS
will be performed and what values each
pass will be written on each of the
passes selected.

5.3.2.2.2 HPA/DCO

This will open the HPA/DCO option for wiping. If
the drive to be wiped has HPA and/or DCO that
needs to be wiped, select Yes for the
corresponding option and the HPA and/or DCO
will also be wiped.

5.3.2.2.3 LBA

By default, this is set to 100% which will wipe all
Logical Block Addresses (LBAs) and will wipe the
entire drive (100%).

5.3.2.2.4 Passes

This Wipe Setting will change depending on the
Wipe Pattern Mode selected.

If None was selected, this is not
selectable.

If DoD was selected, all 7 passes will be
pre-filled. Users can edit the pass values
if desired by tapping the edit icon.

If Custom was selected, one pass will be
pre-filled with a random value. Users
can edit the pass values if desired by
tapping the edit icon.
Editing one or more of the passes in DOD or
CUSTOM mode will bring up this screen:

SKIP – Instructs the SuperSonix-NG to
skip the pass.
45