Sargent PASSPORT 1000 Exit Device Installation Instructions Manual page 29

Passport 1000 P1 Exit Device
13 Install Inside Escutcheon
1. Position inside escutcheon as shown (Fig. 13).
Verify that all wires are positioned within the escutcheon
to avoid pinching.
2. Attach escutcheon with (2) #8-32 x 1/2" T-20 Torx pan
head screws.
3. Straighten escutcheon and tighten securely.
DO NOT OVERTIGHTEN.
Fig. 13
29
(2) #8-32 x 1/2"
Torx Screws
1-800-810-WIRE • www.sargentlock.com • A8034G